Blog

GOES grades are not interchangeable. Standard and high-flux grades differ by 13.6% in core loss at 0.23 mm, and that gap decides whether a transformer

At 10 kHz, nanocrystalline core loss is 8.9× lower than 6.5% SiFe. In 20 kHz DAB converters, nanocrystalline transformers deliver twice the power dens

In 2026, State Grid's 30% floor and new standards made amorphous cores the default in distribution transformers. No-load loss drops 70%–80%; unit iron

No-load loss is the electricity a transformer burns 24/7 — whether it's doing useful work or not. For a 1000 kVA distribution transformer, that's over

Efficiency rules are tightening. The transformer you buy today may be obsolete before it's paid off. This article digs into what actually drives loss

Most transformer problems come down to one thing: sizing by kW instead of kVA. kW tells you what the load does. kVA tells you what the transformer has

A transformer nameplate tells you everything — capacity, voltage, connection, cooling, and more. But most people only look at the kVA. This guide bre

Oil-filled transformers work well outdoors. But indoors — basements, hospitals, data centers — they're a risk. That's where cast resin transformers co

If you're procuring or operating transformers in weak-grid regions like Africa or South America, this article is critical. Discover why standard FAT t

Cast Resin Transformers: Benefits for Harsh and Indoor Environments In modern power distribution, safety, reliability, and environmental adaptability

You're planning a residential community, commercial plaza, or industrial park. Overhead lines are out of the question—they're unsightly, unsafe, and o

Most buyers focus on price. The real cost? Energy waste, motor overheating, and equipment failure from the wrong phase configuration. A 3% voltage im